How to Get Rid of a Tree Stump With Charcoal | Natural Hack

Removing a tree stump is a common issue and a cumbersome task for a gardener. Read this article to know how to get rid of a tree stump with charcoal naturally!

What Is a Tree Stump?

How to Get Rid of a Tree Stump With Charcoal1

When you cut down a tree in your yard or garden, the remaining little portion of the trunk, having roots still in the ground, is called ‘Tree stump.’ It dies later by shock, but sometimes it doesn’t, then you have to kill it manually, and this article will guide you on how to get rid of a tree stump with charcoal. After cutting the tree, if you are wondering what to do with its branches, then check out this article to know some fantastic ideas.

How to Get Rid of a Tree Stump With Charcoal?

How to Get Rid of a Tree Stump With Charcoal2

A tree stump is small but they are incredibly strong when we talk about removing them. Instead of hiring a professional, do the job yourself by trying the below tree stump removal method using charcoal that will do the trick!

DIY Tree Stump Remover

Supplies

  • A Power Drill
  • Wood Boring Bits
  • A Bag of Charcoal
  • Vegetable Oil
  • Small Funnel

Instructions

  1. Once you’ve collected the supplies, attach the wood-boring bit to your power drill.
  2. Then, make a series of holes around 7-10 inches deep into the entire area of the tree stump with maintaining 1 inch of space between each hole you drill.
  3. Make sure to clean the holes before doing the further process.
  4. Now, pour the vegetable oil into the holes using a small funnel. Redo this process continuously for three days.
  5. On the fourth day, check the tree stump if it’s fully saturated or not. If not, then repeat this process for one more day.
  6. Once it’s done, spread the charcoal on the top of the tree stump evenly and pour vegetable oil on it.
  7. Now, ignite the charcoal using a lighter or a matchstick.
  8. The tree stump will take a few hours or a couple of days to burn completely.
  9. Add more charcoal and vegetable oil to keep the fire going until it’s gone.
  10. Make sure to monitor the flame, so it doesn’t spread to the nearby plants.

Notes:

  • Before trying the above method, clear all the leaves and any other stuff that will catch fire.
  • As a preventive measure, keep a bucket of water and sand handy to control the fire, if necessary.
  • While refueling the fire always maintains a sufficient distance to avoid any casualty.

By trying the above natural and inexpensive technique, you’ll easily get a stump free garden in no time. Besides, you can make a tree stump planter by following these four simple steps. If you liked this article, then feel free to share it with your family and friends.

No Comments Yet

Leave a Reply

Your email address will not be published.